Aluminum honeycomb core panel process 1

　　The processing and compounding process of aluminum honeycomb core panel products should be in accordance with the existing texts, drawings and the aluminum honeycomb panel processing composite refinement design. Specifically speaking, there are the following steps.

　　1. Change the irregular hand drawing of aluminum honeycomb core panel to AUTOCAD drawing. After confirmation, print three copies and bind to the book according to the batch and drawing number. The three copies are respectively for the technical unit(transfer to the archives room after completion), the workshop and the quality assurance inspection unit.

　　2. For drawings that are not numbered with aluminum honeycomb core panels, they must be numbered uniformly. The numbered number is further numbered: suffix +A for the panel; suffix +B for the bottom plate; suffix +C for the aluminum honeycomb core; and so on.

　　3. For the aluminum plate or other material surface plate that needs sheet metal processing, the bending coefficient should be carefully measured and filed.

　　4. Write a catalog, calculate the area and total area of a single piece.

　　5. For the aluminium sheet to be processed by sheet metal, draw a sheet metal expansion map according to the bending factor and indicate the size. If the inside and outside are not marked on the map, the map will be drawn after implementation. In general, the main view on the unfolded view faces the person's side as the inner surface (usually uncoated surface), and other conditions are specified. Print three copies and bind them into a book by batch and drawing number. The three copies are respectively for the technical unit(transfer to the archives room after completion), the workshop and the quality assurance inspection unit.